KFL Tooling
Kingdom Forged Labs

Custom work

Send a photo or a drawing of the part you need. Here are two recent ones.

Printed photoeye guard with the tilt bracket inside

Photoeye guard

A customer protected conveyor photoeyes with machined 5" aluminum tube. We replaced it with a printed guard: same footprint, a rectangular beam window, 10-32 height slots on both side walls, and a tilt bracket that holds the sensor's aim.

It weighs less, costs less, and the bracket adjusts from outside the guard with one driver.

Blue printed mounting panel for a battery monitor

Battery monitor panel

A 7" × 4.5" mounting panel for a snap-in battery monitor. The plate is 5 mm thick for stiffness but thinned to 2.2 mm around the cutout, because the monitor's spring tabs only reach 3 mm. Printed in ASA to survive a closed-up vehicle in summer.

Good candidates: parts that are machined when they don't need to be, parts that break often, and parts with long lead times.

Not just for plants: we also make functional parts for trucks, RVs, campers and home shops, like mounts, panels, brackets and replacement pieces that aren't sold anywhere.

Start a custom request